Year | 2020 |
---|---|
Make | Gannomat |
Model | Concept 70 Eco |
Phase / Voltage | 220V Three Phase |
Serial | 901.041 |
Condition | Excellent |
General Description |
Low hours in excellent condition. |
2020 Gannomat Concept 70 Eco Case Clamp
Gannomats most popular Case Clamp- Excellent Condition – Never Placed In Production
- Length – Min 150mm (5.9 inches); Max 2550mm (100.4 inches)
- Height – Min 150mm (5.9 inches); Max 1400mm (55.1 inches)
- Depth — 700 mm (27.55 inches)
- Rear Transfer Table
- Angular Transfer Table
$56,000.00 $41,500.00
SOLD
- Description
- Additional Info
- Video Gallery
- Shipping & Rigging
- More from Seller
- More from Seller
- Store Policy
- Inquiries
In Production | Yes |
---|---|
List any accessories included with the machine |
|
Are there any known broken components? |
|
Please list # of dust outlets including their diameter |
|
|
Machine Location | Illinois |
---|---|
Inspection Dates | Call for Appointment |
-
SOLD
Belfab NBM-OP 4M 15HP Hummer
Slightly
used Belfab dust collector. Excellent condition. Installed in late 2019, not
used for several months during Covid. Estimated less than 1,000 hours on
it.This
unit new is over $17,000 plus freight from Canada- Super quiet HUMMER 1800 RPM fan blower
- Sound pressure (dB) at 10´ (without a silencer) 81dB
- 15HP Fan Module
- 14″ Inlet diameter
- 5,000CFM for indoor installation
- Patented upgradable blower system
- Vertical mechanical manual shaker cleaning system
- Low maintenance direct drive centrifugal fan
- High efficiency TEFC motor, CSA-UL or CSA-US approved
- High efficiency needle felt filter bags
- The unit is configured for push application only
- Pre-wired magnetic starter included
- Electrical Disconnect included
- 4 filter modules
- 660 sq.ft. Filtration Surface Area
- Dimension (W x D X H) in. 120” x 66” x 130”
- Module weight 1,000 (lbs)
- Fan Module weight 350 (lbs)
- Tilt Bin upgradeable (not included)
Load
fee of $ 100 applies. Flatbed only -
SOLD
Accu-Systems HPJ CNC Drill, Glue, & Dowel Insertion Machine
CNC Bore, Glue, and Dowel Insertion machine with two working zones. Zones are 24” each or, one zone with 48” maximum capacity. CNC controlled in X axis with digital readout Y and Z axis adjustment. (4) pneumatic hold down clamps – (2) per zone.
Equipped with 18” diameter vibratory feed bowl, Sealed electronically metered glue system (works with water and pre-glued dowels). 2-1/2 gallon storage tank for glue/water. Anti-slip table surface and dust collection port.
Easy programming and function control through touch screen interface. You can select Drill, Glue, or Insert dowels with a simple touch of the screen
8MM dowel size
$10,000.00$7,500.00
General Inquiries
There are no inquiries yet.