Year | 2016 |
---|---|
Make | Giben |
Model | KG 305 |
Phase / Voltage | 220-480V |
Condition | Excellent |
General Description |
CONTOUR EDGE BANDING MACHINE for application of veneer and coiled PVC, from 0.4 up to 3 mm of thickness. GENERAL CHARACTERISTICS Machine Structure The new base design together with the machined plates on which the units are fixed build a strong structure, able to absorb the vibrations and grant a perfect stability during intensive production. Panel Feeding The correct panel feeding is guaranteed by an in-feed guide system. The feed speed can be set to match the complexity of the contour making operation simple and easy. Control Panel System The control panel incorporates the operating controls for glue temperature, application tape length as well as glue pot on/off switch. STANDARD CONFIGURATION This machine can process either straight or contour edges. Panel Thickness 10~60mm Edge Thickness 0.4~3mm Motor Power 2.35Kw Minimum Interior Curve Radius 20mm Working Pressure 0.6 MPa Outline Dimension 960x950x1000mm Gross Weight 280Kg Voltage 220-480V |
Giben Contour Edgebander Model KG 305
CONTOUR EDGE BANDING MACHINE for application of veneer and coiled PVC, from 0.4 up to 3 mm of thickness. GENERAL CHARACTERISTICS
$5,000.00 $3,500.00
Views: 1793
Categories: Edgebander, Flat Panel Processing Equipment, Straight & Contour Edgebanders
- Description
- Additional Info
- Video Gallery
- Shipping & Rigging
- More from Seller
- More from Seller
- Store Policy
- Inquiries
In Production | Yes |
---|---|
List any accessories included with the machine |
|
Any known issues with the machine? | NO |
Does the machine operate properly? | Yes |
Has the machine been well maintained? | Yes |
Are there any known broken components? |
NO |
Please list # of dust outlets including their diameter |
|
|
Machine Location | Phoenix, AZ |
---|---|
Shipping Weight (approx.) | 280 KG |
Shipping Dimensions (approx.) | 960x950x1000mm |
Loading Fee | $250 |
Machine Removal Date | ASAP |
Should the machine ship on an enclosed van or flatbed | Enclosed Van |
-
SOLD
Belfab NBM-OP 4M 15HP Hummer
Slightly
used Belfab dust collector. Excellent condition. Installed in late 2019, not
used for several months during Covid. Estimated less than 1,000 hours on
it.This
unit new is over $17,000 plus freight from Canada- Super quiet HUMMER 1800 RPM fan blower
- Sound pressure (dB) at 10´ (without a silencer) 81dB
- 15HP Fan Module
- 14″ Inlet diameter
- 5,000CFM for indoor installation
- Patented upgradable blower system
- Vertical mechanical manual shaker cleaning system
- Low maintenance direct drive centrifugal fan
- High efficiency TEFC motor, CSA-UL or CSA-US approved
- High efficiency needle felt filter bags
- The unit is configured for push application only
- Pre-wired magnetic starter included
- Electrical Disconnect included
- 4 filter modules
- 660 sq.ft. Filtration Surface Area
- Dimension (W x D X H) in. 120” x 66” x 130”
- Module weight 1,000 (lbs)
- Fan Module weight 350 (lbs)
- Tilt Bin upgradeable (not included)
Load
fee of $ 100 applies. Flatbed only -
-
General Inquiries
There are no inquiries yet.