| Year | 2016 |
|---|---|
| Make | Laguna |
| Model | Bandit 4/3 |
| Phase / Voltage | 220V Three Phase |
| Serial | 100010396 |
| Condition | Fair |
| General Description |
|
- Description
- Additional Info
- Video Gallery
- Shipping & Rigging
- More from Seller
- More from Seller
- Store Policy
- Inquiries
| In Production | No |
|---|---|
| List any accessories included with the machine |
|
| Does the Machine include a transformer | No |
| Any known issues with the machine? | See below |
| Does the machine operate properly? | Yes |
| Has the machine been well maintained? | Yes |
| Are there any known broken components? |
Glue pot needs replaced |
| Are there any known controller issues? | No |
| Does any software transfer with the machine? | No |
| Please list # of dust outlets including their diameter |
|
|
|
| Machine Location | Morton Grove, IL |
|---|---|
| Shipping brackets included | No |
| Machine Removal Date | May 7, 2021 |
| Inspection Dates | Call for Appointment |
-
SOLD
Accu-Systems HPJ CNC Drill, Glue, & Dowel Insertion Machine
$7,500.00CNC Bore, Glue, and Dowel Insertion machine with two working zones. Zones are 24” each or, one zone with 48” maximum capacity. CNC controlled in X axis with digital readout Y and Z axis adjustment. (4) pneumatic hold down clamps – (2) per zone.
Equipped with 18” diameter vibratory feed bowl, Sealed electronically metered glue system (works with water and pre-glued dowels). 2-1/2 gallon storage tank for glue/water. Anti-slip table surface and dust collection port.
Easy programming and function control through touch screen interface. You can select Drill, Glue, or Insert dowels with a simple touch of the screen
8MM dowel size
-
SOLD
Belfab NBM-OP 4M 15HP Hummer
$10,000.00Slightly
used Belfab dust collector. Excellent condition. Installed in late 2019, not
used for several months during Covid. Estimated less than 1,000 hours on
it.This
unit new is over $17,000 plus freight from Canada- Super quiet HUMMER 1800 RPM fan blower
- Sound pressure (dB) at 10´ (without a silencer) 81dB
- 15HP Fan Module
- 14″ Inlet diameter
- 5,000CFM for indoor installation
- Patented upgradable blower system
- Vertical mechanical manual shaker cleaning system
- Low maintenance direct drive centrifugal fan
- High efficiency TEFC motor, CSA-UL or CSA-US approved
- High efficiency needle felt filter bags
- The unit is configured for push application only
- Pre-wired magnetic starter included
- Electrical Disconnect included
- 4 filter modules
- 660 sq.ft. Filtration Surface Area
- Dimension (W x D X H) in. 120” x 66” x 130”
- Module weight 1,000 (lbs)
- Fan Module weight 350 (lbs)
- Tilt Bin upgradeable (not included)
Load
fee of $ 100 applies. Flatbed only
General Inquiries
There are no inquiries yet.