-
SOLD
2004 SCM Olimpic K208 ER Edgebander
A medium to Heavy duty Edgebander from Italian manufacturer SCM, which allows the processing of edgbanding material from 0.4mm – 10mm Solid wood. The machine does have a Corner rounding unit.
Product Features
- Base structure made of high rigidity tubular steel to guarantee an excellent support for the operating groups and the guides of the feed. Mobile control panel.
- Feed track sliding on 1 cylindrical guides 1 flat to guarantee straight cutting and resistance to heavy side pressure loads.
- Automatic loader for rolled edges and shear device for cutting thickness up to 3 mm
- Glue pot unit, including:
- Teflon coated glue pot to facilitate glue substitution
- Digital thermostat on glue spreader
- Device for automatic recovery of unused glue
- Automatic temperature kick down after temporary non use
- Horizontal pressure unit with 3 rollers of which the first is cylindrical, power driven, with pneumatic pressure adjustment
- The second and third have pneumatic pressure adjustment and opposed coincity to guarantee perfect adherence to the entire panel edge.
- End cutting unit with 2 independent high frequency motors on prismatic guidways and linear sliding pads that tilt from 0 – 15 degrees, easy setting-up and fixed to the pressure beam to avoid interference of scraps when activated, each is equipped with copying device.
- Trimming units tiltable from 0 – 15 degrees, with high frequency motors and large diameter horizontal and vertical copying device, complete with 70 x 12 cutters with 4 throwaway knives
- Buffing unit with two independent tiltable motors
- Roller conveyor with extension support on entire length
- Speed of end cutters and trimmers 12,000 rpm with frequency converter
- Centralised dust-extracting outlet.
- Safety enclosure
- Electrical cabinet with main switch and thermal cut-out for motor protection.
$5,600.00$3,900.00 -
-
2019 Morbidelli P200 5 X 12 Contour Edgebander
Like New
2019 Morbidelli P200 5 X 12 Contour Edgebander
- Eye M Controller with 21.5″ Touch Screen
- Hand Held Pendant w/ 7″ Touch Screen
- Air Conditioned Cabinet
- 20.5 HP Liquid Cooled Router
- Tool Touch Probe
- 12 Position Ride Along Tool Changer
- 14 Position Side Tool Changer
- 17 Vertical Spindles
- 8 Horizontal Spindles / 3+3 in X and 2+2 in Y
- Hinge Unit
- Edgebanding Unit
- Standard two Coils Magazines on Safety Enclosure
- Additional Support for 6 Coils
- EVA or PUR Glue
- Aggregates for 3mm PVC
- Flexmatic Table with 8 Rails
- 8 Lifting Rails
- Variety of Vacuum Pods
- HE Pods
- Conveyor for Dust
- Busch Mink Vacuum Pump
- Pro Speed w/ Safety Enclosure
$320,000.00$250,000.00 -
-
SOLD
Accu-Systems HPJ CNC Drill, Glue, & Dowel Insertion Machine
CNC Bore, Glue, and Dowel Insertion machine with two working zones. Zones are 24” each or, one zone with 48” maximum capacity. CNC controlled in X axis with digital readout Y and Z axis adjustment. (4) pneumatic hold down clamps – (2) per zone.
Equipped with 18” diameter vibratory feed bowl, Sealed electronically metered glue system (works with water and pre-glued dowels). 2-1/2 gallon storage tank for glue/water. Anti-slip table surface and dust collection port.
Easy programming and function control through touch screen interface. You can select Drill, Glue, or Insert dowels with a simple touch of the screen
8MM dowel size
$10,000.00$7,500.00