Product Description: CNC Machining Centre Profit H10 22.32
Qty Item Number Description Total US$
1 ST 320-01003 Machining Centre Profit H10 22.32
The Profit H10 Machining Centre Frame Is
Made Of Thick-Walled_ Arc-Welded
Shaped Tubes.
Steel Ribbing Within The Frame
Ensures High Stability.
Matrix Table:
Matrix Table Made Of Phenolic Resin With
Grooves In The Grid For Holding Stencils And
Vacuum Pods, And For Clamping Different
Materials. Grooves Are Suitable For
Inserting The Rubber Seal Which Is Included
With The Initial Delivery.
Electrics 3x400V 50HZ
1 ST 320-09003 Matrix Table With Two Fences With
Plate In The Front And In The Back, As
Well As 2 Stops On The Left And 2 Stops
On The Right
FELDER-GROUP, FELDER, FORMAT 4, HAMMER And MAYER Are Registred Trademarks Of The FELDER KG, KR - Felder - Stra E 1, 6060 Hall In Tirol, AUSTRIA
Page 1 Of 10
Invoice No. 33R0352/05 COPY
Qty Item Number Description Total US$
1 ST 320-02002 X-Axis Guiding System
The Outrigger Is Moved Along The X-Axis In A
Gantry System Via A Gear Rack With A
Cambered Tooth Profile. High Precision Is
Guaranteed. The Reduction Gearing Guarantees
High Machining Quality And Accuracy. The
Bearings Consist Of Encapsulated Ball
Bushings Running On Hardened And Polished
"Linear Guides.
"
1 ST 320-03001 Y-Axis Guiding System:
The Tooling Head Is Positioned In The
Y-Axis Via A Gear Rack With A Cambered Tooth
Profile. Hardened And Polished Linear
Guides Allow A Smooth And Accurate
Positioning Along The Y-Axis.
1 ST 320-04001 Guiding System Z-Axis
The Bearing Is Carried Out With Encapsulated
Recirculating Ball Bushings Running
On Hardened And Ground Linear Guides.
The Z-Axis Is Positioned With A Ground
Recirculating Ball Screw.
1 ST 320-01022 Axes Traverse Path:
X= 4050 Mm
Y= 2560 Mm
Z= 280 Mm
Working Area:
X= 3120 Mm
Y= 2160 Mm
Z= 105 Mm
Axis Positioning Speed:
X= 100 M/Min
Y= 100 M/Min
Z= 30 M/Min
1 ST 320-02003 Automatic Central Lubrication System
A Pneumatic Control System Delivers The
Grease To The Lubrication Points
Grease Container Capacity 2 Kg.
1 ST 320-00300 Equipment Cabinet:
The Equipment Cabinet Is Integrated Into
The Machine Stand And Complies To
International Standards.
FELDER-GROUP, FELDER, FORMAT 4, HAMMER And MAYER Are Registred Trademarks Of The FELDER KG, KR - Felder - Stra E 1, 6060 Hall In Tirol, AUSTRIA
Page 2 Of 10
Invoice No. 33R0352/05 COPY
Qty Item Number Description Total US$
1 ST 320-00401 HARDWARE Control PC
- Windows 10, 32 Bit Operating System
- Pentium Dual Core Processor
- 250 GB Hard Disk
- 2 GB RAM
- DVD - Drive 16x
- Network Inderface Card
- LED Colour Display, Mouse And Keyboard
- 1 USB Output On The Operator Side
1 ST 320-00400 Mobile Control Panel:
With Screen, Keyboard, Mouse + Mousepad.
Adjustable Keyboard Height.
1 ST 300-00203 Hand-Held Terminal Remote Control For Axes:
With Potentiometer And Emergency Stop
Switch. The Feed Rate Can Be Regulated
During The Machining Process This
Facilitates Machining Complex Workpieces.
1 ST 320-00301 H10 CNC Control: The Format 4 CNC Was
Developed Specifically For Woodworking
Working Machines To Drill Mould And Saw.
The Machine Is Operated Via A Graphical
User Interface (Self-Explanatory And
With Symbol Illustrations)
1 ST 300-00600 Programming Editor's Technical
Specifications WoodFlash:
CAD Function (Mirroring_ Rotation
Repetition Etc.) Graphical Display Of 5
Workable Faces Parametric Programming Using
Geometric And Mathematical Rules
Up To 300 Variables.
Programming On Horizontal And Vertical Faces
And On Fictitious Faces
In All Possible Positions.
Programming Of Single Multiple And
Row Of Drills Fittings Etc...
Programming Of Linear Circular Oval And
Elliptical Routings.
Circular Interpolation On Three Planes.
Chamfer And Connection Programming
With Automatic Speed Control.
FELDER-GROUP, FELDER, FORMAT 4, HAMMER And MAYER Are Registred Trademarks Of The FELDER KG, KR - Felder - Stra E 1, 6060 Hall In Tirol, AUSTRIA
Page 3 Of 10
Invoice No. 33R0352/05 COPY
Qty Item Number Description Total US$
1 ST 300-00601 Automatic Correction Of The Tool Radius.
Possibility Of Excluding Some Types Of
Machining. Many Zoom Settings.
Conditioned Programming (IF/EndIF Blocks)
With Reference To Use Of Macros. Absolute
And Incremental Programming. Creating Subprograms
With Possibility To Multiply
Mirror And Rotate These.
Graphical Help During
Programming For All Machinings. 3D Display
Facilitates Program Control. Program
Archiving With Names Up To 256 Characters
Long. In-Line Recall Of Machine Set-Up
And Tool Specifications.
Machine Tooldatabase Management Of
Up To 500 Tools.
1 ST 300-00602 Pocket Cycle For Defined Shapes (Circle
Square Etc.) Can Be Stored In Macro Form.
Execution Of Single Programs And
Repetition Of Program Lists. Tool Path
Optimizer With Possibility To Choose
Working Priority.
Built-In Oscilloscope To Monitor The
Logical Input/Output Status And The
Position Of The Axes. Digital Display Of The
Speed And Power Consumption Of All Motors.
Importation Of Dxf Files In ASCI Format.
Printing Of ISO Codes Or Graphical Print Of
Workpiece Being Programmed.
Barcode Interface
Calculation Of Time Required For
Program Execution.
1 ST 300-00603 Engraving: Programming Of All Types Of
Installed Tru Type Fonts_ Automatic
Distribution (Linear Or Curved)
Italic Or Bold.
Pocket Moulding: Machining Any Type Of Shape
3 Types Of Pockets (Simple_ Island And Both
Functions Combined) Depth Achieved In
Several Stages_ Rough Moulding And
Finishing. Program "Hold" Function
Associated With Safety Mats. Graphical
Display Of Diagnostic Synoptics
Which Facilitates Use Of Machine.
FELDER-GROUP, FELDER, FORMAT 4, HAMMER And MAYER Are Registred Trademarks Of The FELDER KG, KR - Felder - Stra E 1, 6060 Hall In Tirol, AUSTRIA
Page 4 Of 10
Invoice No. 33R0352/05 COPY
Qty Item Number Description Total US$
1 ST 320-00604 Positioning The Vacuum Pods:
The Workpiece And The Vacuum Pods Are
Displayed Simultaneously. This System
Enables The Optimal Positioning Of The
Vacuum Cups And The Consoles. This Ensures
That The Workpiece Is Held Correctly And
Between The Tooling And The Vacuum Pods From
Taking Place. The Position Of The Vacuum Pos
Is Set Manually Using The Scales.
Positionining Laser As An Option On Profit
H10 Available.
1 ST 300-00620 Teleservice Package Via The Internet:
Hardware And Software For Connection Via
The Internet. The Customer Must Have The
Internet Connection Ready And Available.
The Integration Of The Machine
Into The Company Network Has
To Be Organised Between The
Network Provider And The Customer.
1 ST 320-00200 Uninterrupted Power Supply To The PC
1 ST 320-09013 Vacuum Connections For Templates
With 4 Outlets, Left
1 ST 320-12003 Unloading Unit For H10 22.32
1 ST 320-12006 The Additional Control Terminal Is
Positioned Next To The Unloading Unit And
With The Integrated Label Printer Offers
The Possibility To Print Labels Directly
At The Unloading Station.
For The Manual Labelling Of Components
After Processing.
The Position And Rotation Of The Labels, Are
Shown On The 24" LED Monitor.
Only Possible In Combination With
F4Nest (Including Label Printer).
The Label Rolls For The Label Printer
Are Not Included.
1 ST 320-00302 Equipment Cabinet Air Conditioning
1 ST 320-26002 2 Vacuum Pumps, Each With A Rated Capacity
Of 250 Mn/H:
Dry Cell Pump With Suction Power Of 250 Mn/H
Due To The Large Number Of External
Influences As Well As Varying Materials And
Workpiece Dimensions, It Is Not Possible To
Guarantee A Complete Suction Hold Of The
Workpiece.
FELDER-GROUP, FELDER, FORMAT 4, HAMMER And MAYER Are Registred Trademarks Of The FELDER KG, KR - Felder - Stra E 1, 6060 Hall In Tirol, AUSTRIA
Page 5 Of 10
Invoice No. 33R0352/05 COPY
Qty Item Number Description Total US$
1 ST 320-20001 Moulder Spindle 10 KW HSK F63
The Main Spindle Is Connected To The
Z-Axis Plates By The Linear Guides And
Is Guided With 2 Linear Guides In Each
Case. The Tool Is Clamped With A HSK F63
Connection. The Tool Connection Is Monitored
By 3 Sensors, Which Ensures Increased
Safety. The Tool Holding Fixture Is Cleaned
Pneumatically.
Connected Load: 10 KW (S6)
Speed: 1000-24000 Rpm
Drive: 3 Phase HF Motor Controlled Via
Inverter. Direction Of Rotation: Right/Left
Bearing: Ceramic Bearings
Spindle Cooling: Air-Cooled
1 ST 320-24004 Tool Changer With 10 Tool Positions In Back
Left Of Machine Stand
1 ST 320-24001 Tool Changer On Left-Hand Machine Stand:
With 8 Tool Positions For HSK F63. For
HSK Main Motor With/Without C-Axis.
- Max. Tool Diameter 180 Mm
- Max. Tool Height 230-300 Mm
- Collet Chuck Distance 110 Mm
- Max. Single Tool Weight 7 Kg
- Max. Permissible Total Tool Weight In
The Tool Changer 40 Kg.
1 ST 320-19002 DH 16 4H 2S Drilling Head,
With 12 Vertical And 4 Horizontal Spindles
2 Groove Saws: 1 On X And 1 On Y
1 ST 320-30001 Extraction:
Central Extraction System Via Ports Brought
Together (D=250mm) With Flap Control
Wood-Dust Tested See The Technical
Data Sheet For Specifications.
1 ST 320-33003 Safety Devices Conforming To CE Regulations:
- Single-Part Safety Mat (Optional Infrared
Safety Curtain) - Emergency Stop Switch
- Protective Fence On The Left, Right And
Behind The Machine
- Control Sensors For The Vacuum And
Compressed Air
1 ST 320-10001 Profit H10 Tools
Allen Key Drill Head_ Pressure Grease Gun
For Drill Head_ Torx For Grooving Saw
C-Spanner For Collet Chuck.
Machine Location State:
Machine Location City:
Year: 2012
Make: Felder
Model: Profit H10
Serial No:
Phase/Voltage: 3 Phase 400V
Condition: Excellent
Any Known Issues: No
In Production: Yes
Software Transfer:
Access to Forklift for Loading:
Loading Fee:
Shipping Dimensions:
Shipping Weight:
Shipping Brackets Available:
